• info@opiagroup.eu
  • 15 Temmuz Mahallesi 148004 Nolu Cadde No:7 İç Kapı No:1 Şehitkamil/Gaziantep

OPIA FFP2 PROTECTIVE MASK

Ref. No: OP-MASK-0110

Opia FFP2, one of the protective masks, is produced in our facilities in European standards. Sterility and hygiene are at the forefront at all stages of production.

The Opia FFP2 Mask, which covers the mouth and nose, is loose-fitting, prevents the user from polluting the air around with inhaled droplets, as well as ensuring that they do not inhale dust and microorganisms in the air within the scope of microbiological and occupational health and safety.

Opia FFP2 Masks fit the face tightly and are ergonomic. It protects the user against viruses. These respirators reliably filter the smallest particles and droplets from the air. Masks with exhalation valves offer the wearer an extra degree of comfort. Masks without exhalation valves have the advantage of preventing the wearer from contaminating the surrounding air with inhaled droplets. FFP masks are available in various levels of protection.

Filtration efficiency

Our Opia Mask Filtered face masks can be used for respiratory protection against airborne microbial viruses and microorganisms. They are extremely effective (94-99%) against small particulate matter smaller than 0.3 and 2.5 microns in diameter (PM0.3 and PM2.5, respectively), including many infectious agents. In order to protect yourself from influenza viruses (SARS, bird flu, coronavirus, etc.), respiratory masks are not only recommended by the World Health Organization (WHO) within the scope of PPE, but are now accepted as a necessity.

100% compliant with regulations (CE, FDA, EN 149:2001+A1:2009)

Our FFP2 respirators are certified to meet all performance requirements set by European Standard EN 149:2001+A1:2009. They are also fully CE certified, MDR and FDA approved.

Not reusable (NR)

For your FFP2 particulate respirator to effectively protect you from particulate matter, you should wear it for a maximum of four to five hours. Please do not share your mask with others. If your respirator is damaged or contaminated, please dispose of it according to the instructions on our boxes. Do not use products that do not have a quality control band on FFP2 masks.

Folded Design

You can easily carry our folded masks in your pocket or bag. Since they are useful, it is the right choice for you to always have them with you. Unpack your FFP2 Masks before using them. Fit your FFP2 Masks on your face in accordance with the necessary instructions.

 

Opia FFP2, one of the protective masks, is produced in our facilities in European standards. Sterility and hygiene are at the forefront at all stages of production.

The Opia FFP2 Mask, which covers the mouth and nose, is loose-fitting, prevents the user from polluting the air around with inhaled droplets, as well as ensuring that they do not inhale dust and microorganisms in the air within the scope of microbiological and occupational health and safety.

Opia FFP2 Masks fit the face tightly and are ergonomic. It protects the user against viruses. These respirators reliably filter the smallest particles and droplets from the air. Masks with exhalation valves offer the wearer an extra degree of comfort. Masks without exhalation valves have the advantage of preventing the wearer from contaminating the surrounding air with inhaled droplets. FFP masks are available in various levels of protection.

Filtration efficiency

Our Opia Mask Filtered face masks can be used for respiratory protection against airborne microbial viruses and microorganisms. They are extremely effective (94-99%) against small particulate matter smaller than 0.3 and 2.5 microns in diameter (PM0.3 and PM2.5, respectively), including many infectious agents. In order to protect yourself from influenza viruses (SARS, bird flu, coronavirus, etc.), respiratory masks are not only recommended by the World Health Organization (WHO) within the scope of PPE, but are now accepted as a necessity.

100% compliant with regulations (CE, FDA, EN 149:2001+A1:2009)

Our FFP2 respirators are certified to meet all performance requirements set by European Standard EN 149:2001+A1:2009. They are also fully CE certified, MDR and FDA approved.

Not reusable (NR)

For your FFP2 particulate respirator to effectively protect you from particulate matter, you should wear it for a maximum of four to five hours. Please do not share your mask with others. If your respirator is damaged or contaminated, please dispose of it according to the instructions on our boxes. Do not use products that do not have a quality control band on FFP2 masks.

Folded Design

You can easily carry our folded masks in your pocket or bag. Since they are useful, it is the right choice for you to always have them with you. Unpack your FFP2 Masks before using them. Fit your FFP2 Masks on your face in accordance with the necessary instructions.

 

Product features

  • Valveless particle filtering flat folding mask,
  • FFP2 High Protection level,
  • Soft material edges for high wearing comfort,
  • Headbands offer a comfortable and safe use.
  • Flexible and adjustable nose clip,
  • Soft sealing lip guarantees a safe, comfortable, leak-proof position of the mask
  • Masks are packed separately
  • Compatible with Opia Medical safety glasses

Usage Areas: Hospitals, Paint Industry, Automotive Industry, Machining Factories etc.

 

Materials

Headband        : Textile

Nose clip          : PP

Headband clips : PP

Filter/mask       : 5 Layer (Spunbond + Meltblown +Meltblown + Spunbond + Spunbond)

Weight             : 10 gr

Standard          : EN 149:2001 + A1:2009

Color                : White, Black

Number in Box : 10

Product Barcode

Parcel Barcode

Whatsapp Support Line
OPIA MEDICAL

Follow for new Events, products and more.