PE+PP Gowns

Ref. No: OP - 00207

This multi-ply, AAMI Level 4 white isolation gown is made of PP + PE material for maximum protection. Front and side protection provides protection against high fluid levels and blood-borne pathogens. Thermally insulated seams with tape design provide high performance under hydrostatic pressure and liquid effect.

In 2004, the FDA recognized the American National Standards Institute/Association for the Advancement of Medical Instrumentation (ANSI/AAMI) PB70:2003 and MDR Specifically MDR (European Medical Device CRO) (EU) 2017:745, ISO 13795- consensus standard. 1, ISO 10993-1/5, ISO EN 10993-10/12 standards “Liquid barrier performance and classification of protective clothing and covers intended for use in healthcare facilities.”

The new terminology in the standard defines barrier protection levels of gowns and other protective clothing intended for use in healthcare facilities and specifies the test methods and performance results required to verify and verify that the gown provides the newly defined levels of protection:

Regardless of how the product is named (i.e. isolation gown, procedure gown, or protective gown), when choosing gowns, look for the product label describing the intended use with the desired level of protection based on the above risk levels. Product names are not standard.

Difference Between Level 3 and Level 4 Aprons

Level 3: Moderate risk will be used eg during arterial blood collection, Placement of Intravenous (IV) line, Emergency Room or in trauma cases

Level 4: High risk, eg during long, fluid-intensive procedures, during surgery, when pathogen resistance is required or when infectious diseases are suspected (not airborne)

Features: This PP + PE disposable isolation gown adds rubber strips at each joint to increase tightness and protection, and better protect medical personnel;

Advantages: air leakage, dustproof, waterproof and bacteria filtering.

Purpose: mainly for medical use, including outpatient service, ward and Laboratory of medical institutions, and also special environmental protection, rescue protection, outdoor construction protection, agriculture and livestock protection, pharmaceutical science protection and guard, street office discovery protection, community , traffic control point, company, outdoor mission etc.

 

This multi-ply, AAMI Level 4 white isolation gown is made of PP + PE material for maximum protection. Front and side protection provides protection against high fluid levels and blood-borne pathogens. Thermally insulated seams with tape design provide high performance under hydrostatic pressure and liquid effect.

In 2004, the FDA recognized the American National Standards Institute/Association for the Advancement of Medical Instrumentation (ANSI/AAMI) PB70:2003 and MDR Specifically MDR (European Medical Device CRO) (EU) 2017:745, ISO 13795- consensus standard. 1, ISO 10993-1/5, ISO EN 10993-10/12 standards “Liquid barrier performance and classification of protective clothing and covers intended for use in healthcare facilities.”

The new terminology in the standard defines barrier protection levels of gowns and other protective clothing intended for use in healthcare facilities and specifies the test methods and performance results required to verify and verify that the gown provides the newly defined levels of protection:

Regardless of how the product is named (i.e. isolation gown, procedure gown, or protective gown), when choosing gowns, look for the product label describing the intended use with the desired level of protection based on the above risk levels. Product names are not standard.

Difference Between Level 3 and Level 4 Aprons

Level 3: Moderate risk will be used eg during arterial blood collection, Placement of Intravenous (IV) line, Emergency Room or in trauma cases

Level 4: High risk, eg during long, fluid-intensive procedures, during surgery, when pathogen resistance is required or when infectious diseases are suspected (not airborne)

Features: This PP + PE disposable isolation gown adds rubber strips at each joint to increase tightness and protection, and better protect medical personnel;

Advantages: air leakage, dustproof, waterproof and bacteria filtering.

Purpose: mainly for medical use, including outpatient service, ward and Laboratory of medical institutions, and also special environmental protection, rescue protection, outdoor construction protection, agriculture and livestock protection, pharmaceutical science protection and guard, street office discovery protection, community , traffic control point, company, outdoor mission etc.

 

Fabric Type : SMS (Spunbond + Meltblown + Spunbond)

Usage Areas: Hospitals, Chemical Factories, Petroleum Refineries, Construction Industry etc.

Colors   : Medical Blue, Green, White

Weight : 25 gr, 30 gr, 35 gr, 40 gr, 45 gr, 50 gr

Product sizes: S, M, L, XL, XXL, XXXL

 

Technical Standards

It is breathable, waterproof, lightweight and easy to wear. Knitted or elastic cuffs are used optionally. Our products can be easily used by patients' relatives, patients, nurses, doctors and laboratory workers. It is produced as a double-tie waist and neck-tied or velcro system.

Our products are produced as Sterile and Non Sterile.

 

Packaging

Our products are packaged, and after all our products have passed quality control, the phrase "Passed by Quality Control" is printed on it.

Box size : 40 x 60 x 40

Number of boxes: 50

Product Barcode

Parcel Barcode

Whatsapp Support Line
OPIA MEDICAL

Follow for new Events, products and more.